臭氧氧化-循环喷淋法处理钨钼选矿废水

采用臭氧氧化-循环喷淋法去除钨钼选矿废水中COD,研究了pH值、臭氧流量、循环频率对COD去除效果的影响。结果表明: 废水COD去除率随pH值、臭氧流量、循环频率增大而增加,在pH值为10、臭氧流量3.0 L/min、循环频率4.0次/min条件下,氧化120 min后废水COD含量由131 mg/L降至11.5 mg/L,COD去除率达91.2%,满足《污水综合排放标准》(GB 8978-1996)一级标准。与O₂、NaClO处理废水COD的对比试验结果表明,循环喷淋法结合O₃表现出较好的COD去除效果。     

机翼极限环颤振的CFD/CSD全隐式紧耦合方法

针对轴承振动实时状态监控的需要，从符号动力学角度提出了符号聚合近似与Lempel-ziv复杂度（SAX-LZC）融合的振动监控参数。首先，以Logistic映射和Duffing方程为对象，从理论角度验证了SAX-LZC对动力学结构表征的准确性，并验证了该指标的抗噪能力和计算效率；其次，将SAX-LZC指标与信息熵、样本熵、多分段Lempel-ziv复杂度等动力学参数性能进行了综合对比；最后，从实验角度对轴承早期微弱异常进行了监测，并对轴承典型故障进行了特征提取。理论研究结果表明，SAX-LZC具有动力学结构表征准确、抗噪能力好、计算高效简洁等优点，克服了常规动力学参数工程应用能力弱的问题。实验研究结果表明，SAX-LZC对早期微弱异常有准确的监测，对不同种类故障具有较好的区分度，弥补了时域和频域对轴承微弱故障表征能力不足的缺陷，是一种轴承振动实时状态监控与故障特征提取的有效参数。     

基于太赫兹光谱的人参和西洋参鉴别

为了快速区分人参和西洋参，依据两者所含的人参皂苷在太赫兹波段具有不同指纹光谱，提出了一种基于人参皂苷的太赫兹光谱鉴别人参和西洋参的方法。采用MATLAB软件识别人参和西洋参的太赫兹光谱，同时根据太赫兹光谱特征并通过标准的主成分分析(PCA)区分出人参、西洋参。实验结果表明，基于太赫兹光谱的主成分分析可精确区分出人参、西洋参，并且还可以应用于其他类似物质的区分中。     

工程建设标准客观优先度评价研究

在工程建设标准的制定和修订过程中，如何科学地确定编制顺序一直是困扰标准管理部门的难题，采用传统方式“按需制标”，具有盲目性、主观性，容易造成标准在制定和修订过程中的互相重复、滞后与矛盾。为了保证标准制定和修订工作的协调性，指导标准体系中各标准的制修订顺序，引入复杂网络拓扑结构，将同一标准类型下的标准构成功能团，根据相互之间的关系形成复杂网络，采用剥落算法对其网络节点重要性排序，进而确定标准制修订的优先度。通过对建筑给水排水工程规范标准修订的实证分析，总结工程建设标准的网络拓扑优先度评价的算法模型，实现制定和修订顺序的自动计算，从而更加科学地指导标准的制定和修订工作     

Supply chain network design under the risk of uncertain disruptions

Facility disruptions in the supply chain often lead to catastrophic consequences, although they occur rarely. The low frequency and non-repeatability of disruptive events also make it impossible to estimate the disruption probability accurately. Therefore, we construct an uncertain programming model to design the three-echelon supply chain network with the disruption risk, in which disruptions are considered as uncertain events. Under the constraint of satisfying customer demands, the model optimises the selection of retailers with uncertain disruptions and the assignment of customers and retailers, in order to minimise the expected total cost of network design. In addition, we simplify the proposed model by analysing its properties and further linearise the simplified model. A Lagrangian relaxation algorithm for the linearised model and a genetic algorithm for the simplified model are developed to solve medium-scale problems and large-scale problems, respectively. Finally, we illustrate the effectiveness of proposed models and algorithms through several numerical examples.     

Cobalt ferrite nanoparticles prepared by microwave hydrothermal synthesis and adsorption efficiency for organic dyes: Isotherms,thermodynamics and kinetic studies

Magnetic nanoferrites (MFe₂O₄, M = Co, Ni) were successfully synthesised through microwave-hydrothermal route, characterised and used for adsorption of Eriochrome Black T (EBT) and Bromophenol Blue (BRB) dyes from their aqueous solution. The powder XRD patterns confirmed the formation of cubic spinel structure for both the ferrites. Under identical conditions, the adsorption efficiency of CoFe₂O₄ was found relatively higher than the corresponding NiFe₂O_4. Further characterisations revealed that CoFe₂O₄ sample was nearly spherical in size (8–9 nm) with narrow size distribution. The sample showed superparamagnetic behaviour with saturation magnetization (M_s) value (66.4 emu/g). BET surface area calculated for the synthesized cobalt ferrite as 70.9 m²/g. Batch adsorption experiments as a function of initial dye concentration, pH, contact time and adsorbent dose showed the adsorption of dyes depends on pH. Equilibrium adsorption data were well explained by both Langmuir and Freundlich isotherm models. The maximum monolayer adsorption capacities (Q_o) were found to be 82.6 and 25.6 mg/g for EBT and BRB dyes, respectively. Kinetics of the adsorption was best described by pseudo-second-order model. Various thermodynamic parameters such as ΔG, ΔH and ΔS derived from adsorption data over the temperature range 20–50 °C, accounted for a favourable, spontaneous, endothermic physisorption process. The materials showed potential for repeated use without significant decrease in adsorption capacity after proper regeneration.     

Linking entrepreneurial orientation to project success

Entrepreneurial orientation (EO) is a strategic posture of an organization, and it is related to basic policies and practices for the development of entrepreneurial actions looking for creating competitive advantages. This study develops and tests a model of the relationship between entrepreneurial orientation and project success in Brazilian context. As quantitative research, a survey was used to collect data. A sample of 100 valid answers from project practitioners was treated through the structural equation modeling method. As research implications, the main result points out the positive correlation between the entrepreneurial orientation and the project success, contributing to the development of this research subject and helping to minimize the gap in the literature that addresses the relationship between project success and EO. In practical terms, understanding that innovativeness, risk taking, proactiveness, autonomy and competitive aggressiveness (the dimensions of the EO) can contribute to project success and can also indirectly impact on organizational performance, could help organizations get competitive advantage when developing correlate factors. Finally, the results suggest that practices of project management can be aligned to the firm's entrepreneurial orientation to enable firms to attain better results in their projects and generate a competitive advantage. On other hand, given the proportion of the impact of EO on project success (20.3%) identified in this study, it is critical that project management professionals expand their horizon to recognize other factors that affect project success.     

基于自适应阈值活动语音检测和最小均方误差对数谱幅度估计的低信噪比降噪算法

针对低信噪比(SNR)环境下传统方法对声信号降噪的局限性，提出了一种联合自适应阈值活动语音检测（VAD）算法和最小均方误差对数谱幅度估计（MMSE-LSA）的实时降噪算法。首先，在VAD算法中通过基于能量概率最大值的概率统计来对背景噪声进行估计，对得到的背景噪声进行实时更新并保存；然后，将实时更新的背景噪声作为MMSE-LSA的参考噪声，并对噪声幅度谱进行自适应更新，最后进行降噪处理。通过在真实场景中对四类声信号进行实验，结果表明，该算法在保证对低SNR声信号的实时处理的情况下，相较于传统MMSE-LSA算法，降噪信号的SNR能够提高10~15 dB，且不存在信号过减的情况，可应用于实际工程。     

双离心机法线加速度计动态校准中三参数余弦算法实现及应用

在双离心机的线加速度计动态校准中,三参数余弦算法贯穿在幅频特性、相频特性以及幅值线性度的整个测试中。本文详细描述了三参数余弦算法的概念和推导过程,以及在双离心机线加速度计动态校准数据处理过程中三参数余弦算法的程序实现;介绍了在幅频特性和相频特性中关于采集点的选取方式,降低由于采集点选择方式不同对数据拟合精度造成的影响。选取某型线加速度计为例,利用双离心机进行动态校准,对采集得到的数据点进行曲线拟合并得到测试结果,验证了所编写的三参数余弦算法程序的可行性。